Elegant and minimalistic, classic and curved. So smart and sharp that it's almost impossible to not be distracted by its splendor.

Whether enhancing your bathtub or wash basin, the SERIE 180 bath collection affords you a sublime experience, classic minimalism, and exquisite finish.

What's Included

• 180.2100 Trim Plate
• 180.2100 Handle
• 2-Way Diverter
• PBV1005A – Pressure Balance Valve With Service Stops

Not Included

• Extension Kit (Sold Separately)

Features

• Solid Brass Construction
• Includes Pressure Balance Valve w/ Service Stops
• Lift handle to control volume. Turn left for hot, right for cold.
• Small knob controls 2-way water diversion
• Extension Kit available (Sold Separately)
• Zero Drip Technology
• CAL Green Compliance
• Even the slightest imperfections during the machining process are polished out – ensuring a 100% mirror finish.
• ADA Compliance
• WaterSense Labeled

The PBV1005A – Pressure Balance valve with an integrated 2-way diverter has a ½” NPT male connection valve with two inputs for hot/cold water and two outputs. The valve has a flow rate of 5.5 GPM @ 60 PSI.

Supply Stops – There are two safety stops at each water inlet to prevent water flow in case of installation and repairs.

Handle Operation – The volume and temperature of water is controlled by the lower handle. Lift the lower handle to control the volume and as the handle is moved between left and right, the temperature changes. Move it right for cold and left for hot water. The diverter handle on the top helps in directing the flow from the two outputs of the valve. When diverter handle points left, the water flows through the lower output. When the diverter handle points right, the top output is activated for water flow.

Cut-Out Dimensions – TThe cut out in wall should be 5.43” x 4.76” Inches which is properly covered by the trim plate. This will ensure that the trim plate will cover the cut out hole in the wall.

Trims – The trim set for PBV1005A consists of a trim plate and handle knobs for both top and bottom cartridge. The trim plate has markings for hot/cold. Extension kits for both handles can be ordered separately in case the handles need to be extended for proper fit. Any *2100 or *2101 series trim can be used with this valve. Depending upon the shower model, trims can be of different shape and size, varying from square to circular shower handles.

Specifications

Operating Specifications

	WATER TEMPERATURE This product is to be used with water at a temperature range of 40°F - 120°F ONLY!
	WATER PRESSURE This product is to be used with a water pressure range of 15 PSI to 80 PSI ONLY If the water pressure is greater than 80 PSI install a pressure-reducing valve (PRV)

Technical Drawings

Warranty

Limited Warranty Within The United States & Canada

Isenberg Bath Corp. (“Isenberg”) products have been manufactured under the highest standards of quality and workmanship.

Isenberg warrants to the original consumer purchaser for as long as the original consumer purchaser owns their home (the “Warranty Period” for homeowners), that the Isenberg product that he/she has purchased will be defect-free during normal use and all parts and finishes of this product will be free from defects in material and manufacturing workmanship. All other purchasers (including purchasers for industrial, commercial, and business use) are warranted for a period of 2 years from the original date of purchase (the “Warranty Period” for non-homeowners).

If the product should ever develop a defect during the Warranty Period, Isenberg will provide the parts necessary to put the product back in good working condition FREE OF CHARGE, under normal installation, use, and service.

This warranty is subject to the limitations of liability noted below.

Limitations Liability

This warranty is applicable only to Isenberg products purchased after 1st January 2011 and shall be effective from the date of purchase as shown on the purchaser’s receipt. It applies only to Isenberg products purchased from Isenberg directly or from an Isenberg authorized dealer and installed in the United States or Canada. This warranty is non-transferable.

The Warranty Period for drain assemblies, bathroom hoses, hand-helds, kitchen hand sprays, and kitchen hoses shall be limited to a period of 1 year from the original date of purchase.

This warranty is extensive in that it covers the replacement of all defective parts and finishes, but these are the only two things that are covered. Damage due to installation error, product abuse, product misuse, or use of cleaners containing abrasives, alcohol, or other organic solvents, whether performed by a contractor, service company, or you, are excluded from this warranty.

Further, this warranty will not apply if you do not use the product in its entirety. If any part (including but not limited to a cartridge, hose, handle, o-ring, aerator, flow-limiting restrict-or, etc.), is not installed, removed, or replaced by a non-genuine Isenberg part, this warranty will be voided.

Your sole and exclusive remedy, and Isenberg’s sole obligation, in case of a defective part or finish is to have Isenberg, at Isenberg’s sole option, repair or replace the defective part or finish. By way of example but not limitation, the following costs and expenses are not covered by this warranty: (i) labor costs for the removal, installation, re-installation, finishing or refinishing of the product, or defective part (or of building materials which must be removed, installed, reinstalled, finished or refinished in order to repair or replace the defective product or part); (ii) shipping and freight expenses required to return the product to Isenberg. Repaired or replaced parts are individually warranted only under the same terms and for the remaining balance of the warranty period applicable to that part(s) which is/are repaired or replaced.

IN NO EVENT, WILL ISENBERG BE LIABLE FOR INCIDENTAL, CONSEQUENTIAL, INDIRECT, SPECIAL, OR PUNITIVE DAMAGES INCLUDING, BUT NOT LIMITED TO, LABOR, REMOVAL, RE-INSTALLATION, REFINISHING, LOSS OF USE OF THE PRODUCT, LOSS OF PROFITS, LOSS OF REVENUE, LOST GOODWILL, CLAIMS OF EMOTIONAL DISTRESS, OR CLAIMS OF WARRANTY HOLDERS’ CUSTOMERS, WHETHER BASED ON CONTRACT, WARRANTY, TORT (INCLUDING, BUT NOT LIMITED TO, STRICT LIABILITY OR NEGLIGENCE) OR OTHERWISE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU. EVEN IF THIS WARRANTY IS DEEMED TO HAVE FAILED OF ITS ESSENTIAL PURPOSE, IN NO EVENT WILL ISENBERG’S ENTIRE LIABILITY EXCEED THE PURCHASE PRICE OF THE PRODUCT WARRANTED HEREUNDER.

THIS WARRANTY IS IN LIEU OF AND EXCLUDES ALL OTHER WARRANTIES NOT EXPRESSLY SET FORTH HEREIN, WHETHER EXPRESS OR IMPLIED, BY OPERATION OF LAW OR OTHERWISE, INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. TO THE EXTENT THAT ANY IMPLIED WARRANTIES MAY NONETHELESS EXIST BY OPERATION OF LAW, ANY SUCH WARRANTIES ARE LIMITED TO THE DURATION PROVIDED BY THAT LAW. SOME STATES/PROVINCES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATIONS MAY NOT APPLY TO YOU.

Compliance with Local Codes

Isenberg makes no representations that its products or its installation instructions comply with any or all local building or plumbing codes. It is your responsibility to determine local code compliance and correct usage. Isenberg strongly recommends using a licensed and insured plumber to install or service your Isenberg product.

Warranty Claims Contact Information

You may make a warranty claim or order replacement parts by calling Isenberg Bath’s Corporate office at +1-888-342-2284, or by writing to Isenberg Bath Corporation, P O BOX 630283, Irving TX 75063. Proof of purchase (original sales receipt) must accompany all warranty claims. To receive assistance or service under this warranty, you will be asked to provide a description of the problem, the model number of the product, your contact information, and the date of purchase. Isenberg may, at its option, also request that you, at your expense, mail the defective part or product to Isenberg for inspection.

Documents & Files

• Serie 180 Tub Shower Trim and Handle Specification Sheet
• Pressure Balance Valve With Integrated 2-Way Diverter Installation Manual
• Serie 180 Tub Shower Trim and Handle Parts Diagram
• PBV1005A – Pressure Balance Valve With Integrated 2-Way Diverter Parts Diagram
• Isenberg 2022 Bath Plumbing Fixture Catalog
• Isenberg Smart Guide
• Isenberg Responsible Luxury™ – What's that all about?

Videos

Pressure Balance Valve Installation and Maintenance

Isenberg Faucets offers a wide array of 2-output pressure balance valves and trims for tub/shower applications. These valves can be used in a tub with a showerhead and a tub spout or in a shower usually with a showerhead and a hand-held. This video explains how to install the tub shower faucet from studs, installing the copper supply pipes and finishing up the wall, and installing the trim (plate and handles). It then goes into how to service the valve by swapping out the temperature and diverter cartridges and also how to install the extensions.

Frequently Asked Questions