MrSteam e-SERIES MS90EC1 5 kW Steam Generator with iTempoPlus Polished Chrome Control

• Generator (MS90EC1)
  
• iTempoplus Control (MSITPLUSRD-PC)
  
• AromaSteam (MS Aroma) 
• 1 Liter Eucalyptus Aroma Oil with Caddy (MS-OIL1)
  
• SteamHead (103937PC)
  
• Installation Manual

Steam Installation & Planning

What Exactly Is A Steam Shower?

A steam shower heats water until it vaporizes and then pumps that delicious steam into an enclosed area for your enjoyment. It’s a simple idea—but doing it efficiently, reliably, and beautifully is an art and a science that we’ve spent decades mastering. Click on the components below for an explanation of how a steam shower system operates.

◄Click here to know more about Steam Shower

	Generator The steam room generator powers your steam system by boiling water. It’s about the size of a briefcase, though the exact size varies based on your shower’s construction. It can be installed up to 60 ft away in a closet, vanity, attic, or basement - basically any dry, heated location - with 12 inches of space around the generator for ventilation.
	Control Installed inside the shower and away from the direct steam flow, the control lets you manage your steam session. You can choose to control everything from temperature and duration to music, lighting, and aromatherapy.
	Steamhead This is where the steam is released. It's installed on the shower wall, about 6-12 inches above the floor and opposite the seating area.
	Plumbing and Power Your system will run on low-voltage household electric power (208v or 240v). You will need a water line to the steam bath generator, a steam line from generator to shower, and a drain line.

Benefits Of Steam

Wellness starts with MrSteam®

Nature’s oldest therapy is a key to living well. The innovative steam therapies have been shown to improve physical and mental well-being.

◄Click here to know more about the Benefits Of Steam

BODY Helps maintain vascular function and health Supports cardiovascular health Helps maintain lung health Loosens stiff muscles and promotes flexibility Supports the removal of toxins from the body Prepares the body for relief from temporary joint pain and discomfort Promotes optimal breathing and opens nasal passages May provide temporary relief of respiratory symptoms Promotes sinus drainage by acting as a natural expectorant Cleanses and hydrates skin while opening pores Promotes an increase in blood circulation Supports lactic acid breakdown in overworked muscles May boost metabolism On average, has been shown to burn 150 calories in a 15-minute session at 114° F

MIND Encourages relaxation Helps relieve stress Supports mental acuity and cognitive function May help promote deep, restful sleep Fosters a sense of well-being

SPIRIT Provides a place for rest and renewal Helps create moments of quietude and reflection May elevate your mood

ADDITIONAL BENEFITS Uses less than 2 gallons of water for a 1/2-hour steam bath Costs cents to operate Can be added to an existing shower May increase equity of the home

Let’s Do Steam Properly

◄Click here to know more about the Components For Your Steam Shower

Size We offer different generators for different size showers. High ceilings or particularly large spaces will require a larger steam room generator. Our Virtual Spa tool can help you figure out what you need​.

Materials Most shower enclosures use one or more of these materials: tile, natural stone, acrylic, fiberglass, or composites. Each material has different heat retention properties, and this will be a factor in the generator you choose.

Construction Your shower must be enclosed, insulated, and sealed. Windows, if any, should be double-paned. If you’re tiling your shower, be aware that larger tiles are friendlier to steam because they collect less condensation.

Ventilation There should be no heating, venting or air-conditioning components inside the steam room. All light fixtures must be vapor-sealed.​​

Find A Contractor With Steam Expertise We know you’re handy, but installing a steam shower requires training, experience, and precision. We recommend hiring a licensed contractor experienced with steam shower installations.

e-SERIES Steam Generator

The Heart Of Our Intelligent Steam Shower

e-SERIES Steam Generator Standard Features

	Install Up To 60 Ft Away Installs in areas such as a cabinet, closet, under a sealed bench or in an insulated attic.
	Steam IQ Exclusive microprocessor operating system is the brains of our intelligent steam generator.
	Plug & Play Steam Shower Accessories Easily install spa therapy accessories or components such as AromaTherapy, ChromaTherapy, SteamLinx, and more.
	Self-Diagnostics LED indicators to help you troubleshoot any connection and maintenance challenges.
	Built With Surgical Stainless Steel Naturally corrosion-resistant, 100 percent recyclable stainless steel inside and out.
	Easy On The Environment Designed to save water and energy. Uses less than two gallons of water vs 40 gallons for an ordinary bath.
	Safety First 60-minute automatic cut-off, low voltage board, designed for easy access and safe service.
	Unmatched Quality And Certified For Safety US and Canadian UL listed, and CE and NOM certified for unsurpassed quality and safety.
	Industrial Heating Element Reliable, industrial grade and the industry's largest copper heating element heats fast and is easy to remove and service.
	One Platform All MS Generators work with all MrSteam Controls and with the SteamLinx Mobile App.
	Whisper Quiet Our water solenoid technology ensures that the generator is whisper-quiet and never hammers or hums.
	Small Footprint Compact, easy to install, and about the size of a large briefcase. Requires zero clearance, so it can be placed flush against the wall.​
	AutoSteam Maintains constant steam by introducing just the right amount of water through a proprietary dispersal chamber AutoSteam.​

Technical Specifications Diagram

Steam installation & planning

Steam Generator 360 View

Steam Generator Video

iTempoPlus® Control 

The More Complete SteamTherapy Experience

Pure. Simple. Without Limits. It's never been easier to optimize your steam shower experience. With an elegant design and easy-to-use interface, you can control more than steam. Connect AromaSteam and ChromaSteam systems to create a personalized wellness center.

Features

• Solid brass decorative cover with choice of square or round styles in designer finishes
• Digital display
• Programmable temperature
• AromaSteam Steamhead in matching finish and shape
• Compatibility with SteamLinx
• Soft touch keypad
• Low voltage operation
• Programmable steam bath duration
• Clock
• ON/OFF control for AromaSteam and Chroma72
• Two programmable preset

Square

Round

	FLUSH MOUNT Easily mount and install your control snug to the wall.
	CUSTOM SETTINGS FOR TWO Set the perfect steam temperature for multiple users.
	CHROMA LIGHT & AROMA INFUSER Chroma lighting & AromaSteam infusion.
	SOLID BRASS CONSTRUCTION Manufactured in strong, durable, and long-lasting solid brass
	DIGITAL CLOCK Never wonder what time it is in your SteamShower or bathroom

iTempoPlus® Box Contents

• iTempoPlus Control
• Control Cable (30 ft.)
• Steam head
• Tube of Silicone sealant
• Owner’s Manual

iTempoPlus® Control Video

Aroma Designer® Steamhead

Steamheads That Match Your Bathroom Decor.

Suffuse Your Steam Shower with Aroma

Comes in two shapes, square and round, and 11 beautiful finishes that blend seamlessly with any bathroom decor. Manufactured in solid brass. Add a few drops of your favorite essential oil to suffuse your steam shower with soothing or invigorating natural aromas.

◄Click Here To See About The AromaSteam Steamhead Features

Even distribution of steam while remaining cool to the touch No field assembly required No moving parts Integrated aromatherapy oil well for in-shower use

	AROMA WELL The features oil reservoir for aromatherapy.
	PERFECT MATCH Available in 11 designer finishes to match your steam shower control selection.
	NO ASSEMBLY REQUIRED No assembly of moving parts is required.
	DIMENSIONS Standard with glass finish controls. 3”w x 2.75”h x .875”d.
	CIRCULAR DIMENSIONS Standard with round designer finish controls 3” in diameter x 0.875” depth

A SteamTherapy Bonus

More than Steam - Wellspring of Health. The sleek and integrated oil well is designed to infuse steam with your essential oils— enhancing your steam experience through aromatherapy. The AromaSteam SteamHead goes above and beyond to make sure your steam experience is fully realized.

Aroma Steamheads Video

AromaTherapy

Infuse Your Steam Shower With Scent

The Aromasteam System

AromaSteam’s state-of-the-art injector pump

Not all infusion is the same. The AromaSteam System is the most complete and efficient way to inject aroma into your steam shower. The AromaSteam’s state-of-the-art injector pump electronically atomizes our botanical fragrances into your steam at the source, for the most complete and consistent infusion of delightful essences into your steam shower. The included stainless steel caddy holds the liter aroma fragrance bottle right where you want it. We’ve raised aroma to an art form.

◄Click here to know more about AromaTherapy

Infuse Scent into Steam Breathe. Scent. Bliss. Your most primordial sense, smell, has the power to affect your mood almost instantly. Imagine your steam bath infused with delightful, invigorating, aromatic fragrances such as eucalyptus, lavender and mint—a different essence for every mood. Whatever your desired mood, the AromaSteam System is the most effortless and effective way to infuse our fragrances into your steam shower and your life.

Features Electronic oil delivery system evenly infuses scent into steam Complete with hoses, fittings and oil atomizer Can be controlled directly from an iSteam® or iTempoPlus® AromaSteam System oils available in one-liter bottles The AromaSteam is rated 0.5 Amps at 120 VAC cULus Listed

Dimensions

Package Contents 6 feet of pressure hose 2 feet of suction hose Filter Atomizing Nozzle Installation and Operation Manual

AromaSteam Essential Oil 1L (MS-OIL1)

Mr.Steam® AromaSteam Oils, 1L., (33 oz.) for AromaSteam System only.

Aromatherapy has been recognized for centuries as having potentially profound healing effects. Aromatherapy was mankind’s first medicine, a holistic practice of caring for the body using botanical oils. Essential oils can help awaken and stimulate, or relax and promote better sleep. The Mr.Steam® Aromas are a unique collection of natural fragrances, available in 1-Liter bottles, that enrich the steam experience. Each aromatic oil offers a distinct fragrance with characteristic benefits.

Eucalyptus one-liter bottle is included.

Aromasteam Video

• e-SERIES Generators are crafted from recyclable stainless steel and assembled with meticulous attention to detail. Designed, engineered, and assembled in Long Island City, NY to the most exacting standards, our generators are clean, green, virtually silent, and ultra-efficient.
• The iTempoPlus® control makes it easier than ever to optimize your steam shower experience with an elegant design and easy-to-use interface, that allows you to control more than steam.
• AutoFlush® is an automatic self-cleaning system that promotes a long, healthy life for steam generators by automatically flushing the generator of sediment two hours after every steambath
  
• Includes a one-liter (33 oz.) bottle of our Eucalyptus Oil - A deeply refreshing aroma with cleansing effects.

Technical Specifications

Limited 2-Years & Lifetime Warranty

"Mr.Steam® warrants that every Mr.Steam® Residential Steambath Generator (“Generator”) will be free from defects in materials and workmanship for its lifetime. Mr.Steam® will repair or replace (at its option) a Generator that fails to conform to this warranty. If the warranty claim is made within two years from the date of purchase of the Generator, Mr.Steam® will provide free in-home warranty service, parts, and labor. If the warranty claim is made after two years from the date of purchase of the Generator, Mr.Steam® will provide a lifetime warranty on parts.

Mr.Steam will repair or replace (at its option) Mr.Steam Controls and Accessories if they fail to conform to this limited warranty. All warranty work will be performed without charge when the Mr.Steam Control and Accessory are returned to the location designated by Mr.Steam within 2 years of the date of purchase. To obtain warranty service, call 1800-614-7411 or support@usbathstore.com.

Warranty Service within 2 years from the date of purchase

If the warranty claim is made within two years from the date of purchase of the Generator, MrSteam will provide free in-home warranty service, parts, and labor.

Note: If in the judgment of MrSteam the defect is not covered by this warranty, the costs of any in-home service, as well as the costs of repair or replacement together with all freight charges, will be the responsibility of the claimant.

◄Terms, Conditions, and Exclusions

This warranty does not apply to a Generator that is or has been: Used in any non-residential setting. Damage by lightning, electrical storms or electrical surges or spikes Damaged by reason of local water conditions. Installed or operated other than in accordance with the MrSteam supplied Installation, Operation and Maintenance Manual

Are you worried that installing a steam shower in your home might be an intimidating prospect? After all, this is likely something you’ve never done before. And you may have questions – lots of questions – and aren’t sure where to get the answers.

That’s why we created this steam shower FAQ – to give you answers to your top steam shower installation questions. We’ll help you learn how easy it is to install a steam shower and how quickly you can enjoy the benefits of steam at home!

◄Click Here To See The FAQ Section

How do I size my steam shower generator? Mr. Steam considers how to size a steam shower generator so important that we've developed the Virtual Spa System. It provides a streamlined step-by-step guide that walks you through sizing a generator, and also selecting your control, steam head and adding other options as well if you like. Go to https://usbathstore.com/ and enter the dimensions of your shower enclosure and select what finish material you’ll be installing on the walls, and ceiling and VirtualSpa will tell you which generator is best for your project.

Where can I purchase MrSteam products – Steam Shower Packages, Steam Showers Control, Steam Shower Generator, and Steam Shower Accessories?   Visit US Bath Store

Where can I find the Smart Sizing tool to determine what size MrSteam Residential Steam Shower generator I need?   To find the Smart Sizing tool, go to https://usbathstore.com/. You will find it just below the new interactive Virtual Steam Shower Generator and the Steam Shower generator Video. If you would also like to virtually select the steam shower control and steam head, please visit https://usbathstore.com/.

Do MrSteam Steam Shower Systems work with smart home and home automation systems?   Your MrSteam SteamShower System can integrate with many Home Automation and Smart Home systems by using our HomeWizard System, https://usbathstore.com/. Speak with your Home Automation system professional about installation options.

What are the differences between the MrSteam Steam Shower Controls, iSteam3, AirTempo, iTempoPlus, and iTempo?   They offer four distinct steam shower controls. Their most technologically advanced control, with unsurpassed swipe touch functionality in a sleek, contemporary package, the iSteam3. The only wireless steam shower control available, Air Tempo mounts on almost any hard surface. Their push-button friendly iTempoPlus and iTempo that mount nearly flush and are available in 11 designer finishes. You can learn about each in this complete article, Which Steam Shower Control Is Right for You?

How do I install my MrSteam Steam Shower Generator?   Before installing your new Steam Shower System, we recommend that you consult with licensed a professionals like a contractor, a plumber and an electricians about installing a steam shower system. To help you understand the steps involved here is an article that you may find helpful. Read this article: https://usbathstore.com/blogs/learning-center/how-to-install-a-steam-generator-3-minute-video-from-mrsteam

Does My Existing Tub/Shower Need To Be Modified?   Most do, while others may not need to be. All have to be water tight on all walls and the ceiling. A licensed contractor who is familiar with steam can help you make that happen. We do recommend ceiling heights be no higher than 8’. You only need to tile and water seal the portion of the ceiling that will be directly exposed to the steam (inside the steam shower). The primary purpose is to retain heat and prevent moisture from escaping the shower enclosure.

What Determines The Size Of A Mrsteam Steam Shower Generator?   The size of your shower enclosure, in total cubic feet, along with finish material, will determine which MrSteam generator you will need. The larger the space, the more steam you need to fill it. And the more steam you need, the larger the generator needs to be. You may be reconfiguring a current shower for steam or constructing an entirely new space – large or small. We do recommend that your shower enclosure not be smaller than 3’ x 3’ x 7’. That way you have enough space to stand or sit a safe distance from the steam head. In all cases, there are a few criteria to take into account when selecting the right generator size: The steam shower dimensions: length, width, height. Multiply each to determine your total room volume in cubic feet. The materials for the shower walls and ceiling each have different heat retention properties, and this will be a factor in the generator you choose

Where Do I Install The Mrsteam Generator?   A MrSteam generator can be installed anywhere within 60’ of your steam room—in a heated attic or basement, closet, vanity, etc. We recommend leaving 12” of excess space on the top and sides for servicing and to ensure adequate ventilation. Do not install the steam generator inside the actual shower enclosure or in an unheated location where the water supply piping might freeze.

How Much Water Does A Steam Shower Use – And How Much Does It Cost To Operate?   You may be surprised to learn that energy usage for a MrSteam steam shower is typically less than $1 for an average steam shower session. To produce the steam needed for a typical 20-minute steam bathing session, a home steam generator only needs to heat two gallons of water—much less water than you use in a bath or shower! A week’s worth of steam sessions uses only 14 gallons of water.

Who Should Help Us Install The Steam Shower?   Because steam shower installation involves both water and electricity, we recommends professional installation by a licensed plumber, electrician, or contractor who is familiar with steam. USBathStore can supply the names of contractors and answer any questions your builder or contractor might have about steam shower installation.

How Does A Home Steam Shower Work?   A steam generator, typically no larger than a briefcase and often installed in a vanity or closet, heats the water to a boil. You push a button, delivering the resulting steam from the generator to the steam head outlet and into your shower enclosure. And then you relax and enjoy the luxury of steam. It's really quite simple.

When/Where Did Steam Bathing Begin?   The desire to cleanse, purify and enjoy steam in a communal setting stretches back as far as the Bronze Age. Steam bathing has always been a way to meet and socialize, relax and leave behind the stress of the day – whether that be in the thermae of ancient Rome, the sweat lodges of the Native Americans or the spring-fed onsen of the Japanese.

What Kind Of Wall And Ceiling Materials Are Best For Constructing A Steam Shower?   The more porous a material (e.g., marble, shale, granite, glass block, or concrete), the more quickly it will dissipate heat, rather than retaining it. If you choose the natural beauty of marble or stone for your steam shower, be sure to select a more powerful generator to compensate for the faster heat loss. Conversely, choosing nonporous materials like ceramic, porcelain or acrylic, will retain heat in the shower, and a smaller generator will be adequate.

Do I Have To Tile The Entire Bathroom Ceiling Or Just The Shower Ceiling?   You only need to tile the portion of the ceiling that will be directly exposed to the steam (inside the steam shower). Remember, the primary purpose of the tile is to retain heat and prevent moisture from escaping the shower enclosure.

Where Should I Install The Steam Generator?   A MrSteam generator can be installed anywhere within 60 feet of your steam room—in a heated attic or basement, closet, vanity etc. Just note that we recommend leaving 12 inches of excess space on the top and sides for servicing and to ensure adequate ventilation. Do not install the steam generator inside the actual shower enclosure or in an unheated location where the water supply piping might freeze.

What Kind Of Seating Should I Install In The Steam Shower?   Seating style is a personal preference and may depend on the shower room’s size. To maximize space in smaller showers, you might opt for a fold-up seat, such as the MrSteam teak seat, coated for moisture protection. Some users opt for a tiled bench that can be installed diagonally in a corner or along a wall, opposite the steam head.

How Much Does A Steam Generator Cost?   List prices for generators begin at $1,575 plus installation costs. Use our Virtual Spa Tool to get a handle on the pricing.

What Is The Minimum Size For A Steam Shower?   We recommend that your shower enclosure be a minimum of 3’ x 3’ x 7’. That way you have enough space to safely stand or sit on a fold-up seat installed across from the steam head.

Is It Ok To Have A Window In My Steam Shower?   While a window in the shower is common in some homes, many homeowners are concerned about steam (moisture) getting between the window and the outside wall. For steam showers that have an exterior window, you need to make sure they are properly insulated to prevent steam from escaping. We recommend using double-paned windows. If your window slides open, make sure it is gasketed to prevent steam loss during a shower.

Can I Include A Transom In My Steam Shower?   Some people have a transom window in their shower (think of a horizontal window that sits above a door, which sometimes is hinged to allow air movement). Although this window is mostly a design choice, it offers the practical benefit of allowing air into the shower when steam is not used. This allows moisture to exit from the enclosure (compared to a closed, air tight door). Just make sure it’s closed during a steam shower.

Do I Need To Slope My Steam Shower’s Ceiling?   Small grouted ceiling tiles tend to drip at the edges. As a result, smaller tiles with many grout joints may require a slight slope to prevent condensation from dripping down on top of the unsuspecting bather. In a residential setting, slope the ceiling 1/2" per foot away from where you will be sitting. If you use a solid material for your ceiling, like a sheet of Swanstone, you may not need a slope since it doesn’t trap condensation the same way grouted tiles do.

Can I Install Lighting In My Steam Shower?   When installing a light in a steam shower, make sure it is vapor proof and provides protection against moisture entry. The light is typically protected by a ground fault circuit interrupter (GFCI), which will shut off the power if it detects moisture in the fixture. MrSteam manufactures both recessed and surface mounted lights that are UL and cETus listed.

What Should I Do If My Steam Generator Starts Leaking Water?   Your steam generator should not leak, but in the event that it does, turn off the water along with the unit’s power supply. Contact our technical service department at 00-614-7411 and be ready to provide the generator’s model and serial number, how long it has been installed and where the leak appears to be coming from. We recommend installing a drip pan under the steam generator, which will prevent moisture damage in the case of possible leaks.

Why Is Sealing Steam Shower Windows And Doors So Important?   Sealed windows and doors mean that your steam shower will do what it’s supposed to do: provide you with a steam room experience in an enclosure where steam doesn’t escape and drafts can’t get you. There are two aspects to ensuring that perfect steam shower experience: We recommend installing a drip pan under the steam generator, which will prevent moisture damage in the case of possible leaks.

How to Seal Your Steam Shower Windows   Imagine that the personal steam spa sanctuary you have in mind is one where the outdoors seems to be one with indoors. Expansive windows bring sunlight and greenery inside. As you step into your glass enclosed steam shower, and billowy steam fills the space, you bask in the sunny green-tinted mist and feel the weight of the world leave your shoulders… That vision is totally doable as long as you – or rather your installation professional – properly seal your steam shower windows and doors. So, let’s talk about it. Why Is Sealing Steam Shower Windows And Doors So Important? Sealed windows and doors mean that your steam shower will do what it’s supposed to do: provide you with a steam room experience in an enclosure where steam doesn’t escape and drafts can’t get you. There are two aspects to ensuring that perfect steam shower experience: Windows in your steam shower enclosure that face and may open to the outside The glass windows, panels and doors around your steam shower enclosure Let’s explore both and how to ensure each is properly sealed. How To Seal An Exterior Window In A Steam Shower A poorly insulated window anywhere in your home is problematic. Even more when you have an exterior window in your steam sanctuary. Not only can it lead to energy loss, but also to uncomfortable drafts that completely take away from your relaxing SteamTherapy wellness session. An exterior window connects the inside of your home to the outside; it visually brings the natural world into your home. However, since it interacts with the outdoors, it also has to deal with temperature changes that can stress the window materials through expansion and contraction. Furthermore, according to the Second Law of Thermodynamics, heat naturally moves toward cold surfaces. If your exterior steam shower window isn’t properly sealed, that steamy vapor will escape outdoors or penetrate the window itself. Advice On Sealing Your Steam Shower Exterior Windows So you can experience the outdoors in your steam room on your terms only (i.e., the steam stays in and the cold air stays out), here is advice for dealing with those exterior windows. Kris Lee, MrSteam Regional Sales Manager who started out in technical support, explains that for maximum protection you should ensure that your external window is composed of double paned glass to prevent any heat or cold from coming in or going out. The editors at Fine Homebuilding magazine encourage the use of vinyl-clad windows housed in a wooden jamb, cement backer board, a waterproof membrane, and a good quality silicone caulk. About the window, they explain, “The vinyl provides maintenance-free protection from moisture for the window itself. The all-wood jamb provides a flat and sound base. Make sure that you locate the window outside the range of the spray from the showerhead.” And, ‘When the tile is complete and the grout is sealed, use a good silicone caulk where any two planes come together, like where the window meets the newly tiled jamb.’ They also recommend checking every year to anticipate cracked joints that you might caulk or grout if necessary. How To Seal The Glass Windows, Panels And Doors Around Your Steam Spa For The Best Puffy White Steam Next is sealing the glass windows, large glass doors and side panels that face inside your home and allow even more light into your steam shower. Your personal steam shower needs to be enclosed and insulated to keep the soothing steam in place. It should be equipped with a water-tight shower door, too. And although the shower space needs to be water-tight, it does not have to be air-tight. In fact, some air infiltration, especially around the shower door, allows you to see the steam form. “When your shower is completely water-tight, you get that puffy white vapor that is integral to the steam experience,” says Lee. "Create a water-tight seal steam shower door seal--rather than just an air-tight one--to get the best puffy white steam." Advice On Sealing Glass Windows, Panels And Doors According to Lee, it’s best to seal doors and glass panels with a glazing gasket or strips. These gaskets or strips are made of rubber; they go on each side of the glass, holding it in place while keeping moisture in the shower area. Similarly, add a silicone weather strip at the bottom of the glass door for a better seal. The editors of Buildipedia say the key to successfully installing waterproof glass panels is to lay down a thick bead of silicone caulk on shower curbs and side rails, as well as any joints where the frames meet the walls. Bonus Tip: How To Ventilate Your Sealed Steam Shower So you’ve taken care of properly sealing all your windows, glass panels and doors, and can go about regularly enjoying all of your steam shower’s steamy goodness. Here’s how to easily let that steam out when you’re done: Turn on your shower to condense the remaining steam in the enclosure before stepping out. Use an exhaust fan. Standard exhaust fans (located outside of your steam shower) will remove the moist air from your bathroom. Install a louver. When opened, a louver will let air out of your steam shower so the exhaust fan can take care of it. Reminder: No heating, venting or air conditioning devices should be installed inside the steam room! In short, if you do have windows in your steam shower, you don’t need to worry. As long as they are properly sealed, they won't in any way detract from your steam room experience. What Other Steam Shower Questions Can We Help You With? At MrSteam, we’re dedicated to answering all of your questions regarding steam room installation and design. If you have questions about steam, let us know in the comments. We want you to fully enjoy the health and wellness benefits of steam.

Order Confirmation:

You will receive a confirmation email as soon as you place your order. After that, we double-check if all items ordered are in stock and available for immediate shipment. If your order is available for the delivery within the advertised time frame, we will submit it for shipment to the warehouse. If the expected delivery time exceeds the advertised time frame, we'll reach out to you via email and/or phone to confirm the order.

Order Shipment:

You will receive an email confirmation with tracking number within 1 business day from the time the item has been shipped. If you would not receive tracking information within 10 business days of your order, feel free to follow up with our customer service team.

Estimated Time of Arrival:

We typically deliver within 2-10 business days. Custom made products are usually delivered within 4-12 weeks. If the expected delivery date for your order would fall outside of the advertised 2-10 business day time frame, our customer service team will reach out to you to confirm if you are OK with that date.

Areas Covered:

All estimated delivery dates and shipping costs advertised on the website apply the the contiguous United States only (the Lower 48 and D.C.). Please contact our customer service team to discuss the time and cost of shipping to Hawaii, Alaska, or the U.S. territories. We don't ship internationally, but we can ship your order to a freight forwarder of your choice.

Damages:

It is critical that you inspect the packaging of all items when they arrive and check if you received all boxes listed on the delivery receipt. If you notice any damage or shortage of packages, you must make a note of it on the bill of lading, take pictures, and refuse delivery. Your note should say "refused due to damage". If there are no damages visible before opening the box, you must note "subject to further inspection may contain concealed damage". By signing a freight delivery without making any notes, you accept the product as it is and release the seller from any liability. If you notice any damage after receiving the delivery, do not throw the box away, and contact us with the photos of all sides of the packaged goods within 2 business days. We cannot process your claim if you fail to send images within 2 business days. After we receive information from you about the refused delivery or concealed damage, we immediately initiate a claim with the shipping company or with the manufacturer. After the claim is fully processed, we ship all replacements at absolutely no cost to you.

Cancellations & Returns:

We can cancel your order at absolutely no cost to you before the shipping label or Bill of Lading has been created, or before production of a custom order has started. Custom made items are not eligible for cancellations or returns after production has started. You can return all non-custom made items within 30 days of delivery, except when noted otherwise on their product page. To be eligible for a return, the item must be unused and in the same condition as you received it. It must also remain in the original packaging, and the packaging must be in perfect resellable condition. The cost of shipping the product both ways (to the customer, and back to the warehouse) and a 25% restocking fee will be deducted from the refund. Orders delivered outside the United States are not eligible for refunds. If your order arrived damaged, "Damages" section applies. Please contact us before returning your order to discuss shipping details. All refunds will be issued to the credit card you used for your purchase within 2 days after all returned items arrived at the warehouse. If a credit card refund is not possible, we will issue a direct deposit.